Spectrum Technologies

Knowledgebase Home | Glossary | Favorites | Login Knowledgebase Home | Glossary | Favorites | Login
Search the Knowledgebase Browse by Category

Continue
Advanced Search
* Query:
  Categories:
  Rated:
Search Results for "logger"
There were 39 articles found for your query: (Page 1 of 2)     «« |  Prev | 1 | 2 | Next | »»
  1. How to properly install a USB-to-Serial driver.How to properly install a USB-to-Serial driver. [Article]
    Please be sure to install your driver properly by following the instructions in attached PDF file (at bottom of this article). We recommend the following USB to serial adaptor brands: Ma

  2. DELETE button not functioning on SC900DELETE button not functioning on SC900 [Article]
    The DELETE button will only be active when the data logger is enabled. To enable the data logger, connect the SC900 meter to Field Scout software and bring up the Meter Settings screen.&nb

  3. The real-time weather monitor does not appear when I hit the quick button or the real-time weather monitor option in the Logger menu.The real-time weather monitor does not appear when I hit the quick button or the... [Article]
    There is a delay between when the real-time monitor is selected and when the current data conditions appear in the monitor screen. Likewise when a data refresh is requested. If the monitor screen is

  4. Error Message "Unable to connect to the Logger. Overflow"Error Message "Unable to connect to the Logger. Overflow" [Article]
    The "Overflow" error message indicates that there is some bug in the SpecWare. Reinitializing the logger header will probably fix the problem (see attached file). If there is data that

  5. The "Real-Time Weather Monitor" option in the Logger MENU is not active.The "Real-Time Weather Monitor" option in the Logger MENU is not activ... [Article]
    Before this option is made available, SpecWare must launch or download a WatchDog full weather station (models 525, 550, 600, 700, 800, or 900ET). This option is not available with the WatchDog mini

  6. Error Message "Run-time error 63: bad record number" (SPAD 502 meter)Error Message "Run-time error 63: bad record number" (SPAD 502 meter) [Article]
    If the SPAD meter is turned off and immediately turned back on, a capacitor in the data logger's microcontroller circuit will not have time to completely power down.&nb

  7. Error Message "Bad Data Returned X[72]"Error Message "Bad Data Returned X[72]" [Article]
    This message appears if the paperclip test is done with the interface cable connected to a logger or weather station. This very likely indicates that the correct Com port has been selected. Remove t

  8. Error Message "Division by zero"Error Message "Division by zero" [Article]
    The "Division by Zero" error message can appear if there are too many files in the Specware directory (or the dire

  9. Error Message "Unable to Write WatchDog Header"Error Message "Unable to Write WatchDog Header" [Article]


  10. Error Message: Cannot relaunch Shuttle until all data has been downloadedError Message: Cannot relaunch Shuttle until all data has been downloaded [Article]
    The shuttle can only be launched when the LCD screen reads "off". This indicates that there is no data on the shuttle that has not been downloaded. If there are shuttle positions that have not yet b

  11. Error Message: SpecWare trying to perform a Fast LaunchError Message: SpecWare trying to perform a Fast Launch [Article]
    When communicating with remotely located WatchDog weather stations via radio transceivers or a telephone connection, it is not possible to bring up the Launch Options screen to modify th

  12. My model 450, 250, or 150 logger shows 20.7% humidity in errorMy model 450, 250, or 150 logger shows 20.7% humidity in error [Article]
    The RH sensor has two leads (wires) which are inserted into small sockets on the circuit board of the 450.

  13. Error Message Error Message [Article]
    This error message is generated when SpecWare is trying to append newly downloaded data to a data file that has characters after the last line of data. This can happen if the existing file has had d

  14. I can bring up the real-time monitor but I cannot launch or download the WatchDog weather stationI can bring up the real-time monitor but I cannot launch or download the WatchDo... [Article]
    ...ors and the data can be viewed on the real-time monitor. However, the data is not sent to the data logger and the L

  15. I have connected the Watermark sensor to my WatchDog logger or station and am getting dashes or "Sensor Error" message on the LCD screen.I have connected the Watermark sensor to my WatchDog logger or station and am ge... [Article]
    The WatchDog is not sensing the Watermark sensor. When the sensor is new, or very dry, it must be soaked up before it will be able to respond. If the sensor is already wet, doubl

  16. Input Past End of File (RUN-TIME ERROR 62)Input Past End of File (RUN-TIME ERROR 62) [Article]
    This error message is generated when SpecWare is trying to append newly downloaded data to a data file that has characters after the last line of data. This can happen if the e

  17. The "Contact Remote Weather Stations" option in the Logger MENU is not active.The "Contact Remote Weather Stations" option in the Logger MENU is not... [Article]
    Before this option is made available, SpecWare must launch or download a WatchDog full weather station (models 525, 550, 600, 700, 800, or 900ET). This option is not available with the WatchDog mini

  18. I have connected the Watermark sensor to my WatchDog logger (or weather station) and am getting dashes (or "Sensor Error" message) on the LCD screen.I have connected the Watermark sensor to my WatchDog logger (or weather station)... [Article]
    The WatchDog is not sensing the Watermark sensor. When the sensor is new, or very dry, it must be soaked up before it will be able to respond. If the sensor is already wet,

  19. Error Message - ActiveX component can&#39t create objectError Message - ActiveX component can&#39t create object [Article]
    The message generally appears soon after installing SpecWare when trying to connect to a Model 100 (button) Logger. It is a result of Windows failing to register a key component during the reg

  20. Error Message Error Message [Article]
    ... trying to open an existing data file. There is not enough data to graph over 3 time intervals. The logger has not been running long enough to collect data that spa

(Page 1 of 2)     «« |  Prev | 1 | 2 | Next | »»