Spectrum Technologies

Knowledgebase Home | Glossary | Favorites | Login Knowledgebase Home | Glossary | Favorites | Login
Search the Knowledgebase Browse by Category

Continue
Advanced Search
* Query:
  Categories:
  Rated:
Search Results for "error 513 unable to contact watch dog"
There were 66 articles found for your query: (Page 2 of 4)     «« | Prev | 1 | 2 | 3 | 4 | Next | »»
  1. Error Message: The registration information for SpecWare has been tampered with (1). Please contact your distributor for assistanceError Message: The registration information for SpecWare has been tampered with ... [Article]
    This message is usually triggered when the installation date of the software precedes the date on the computer. Check that the date and time on your computer are correct. If this does not correct th

  2. Error Message: Cannot Find File olch2x32.ocx, file not registered Error Message: Cannot Find File olch2x32.ocx, file not registered [Article]
    When SpecWare is installed, several files are created or modified in the Windows sub-directory. If the software did not install properly, one or more of these files may not be present. Also, if the

  3. Error Message: No Carrier Found Error Message: No Carrier Found [Article]
    The telephone modem at the weather station has answered but cannot establish a synchronous connection with the computer modem. One possible cause is that the baud

  4. Error Message: SpecWare trying to perform a Fast LaunchError Message: SpecWare trying to perform a Fast Launch [Article]
    ...ated WatchDog weather stations via radio transceivers or a telephone connection, it is not possible to bring up the Launch Options screen to modify th

  5. No GPS Found with Field Scout MeterNo GPS Found with Field Scout Meter [Article]


  6. Error Message 519  Unable to Contact WatchDog 2Error Message 519 Unable to Contact WatchDog 2 [Article]
    This message occurs when trying to use the 2000 Series Shuttle with version 1.06 and earlier of Spec8Pro. Update your Spec8Pro software.

  7. My model 450, 250, or 150 logger shows 20.7% humidity in errorMy model 450, 250, or 150 logger shows 20.7% humidity in error [Article]
    The RH sensor has two leads (wires) which are inserted into small sockets on the circuit board of the 450.

  8. Error Message Error Message [Article]
    This error message is generated when SpecWare is trying to append newly downloaded data to a data f...

  9. I have connected the Watermark sensor to my WatchDog logger or station and am getting dashes or "Sensor Error" message on the LCD screen.I have connected the Watermark sensor to my WatchDog logger or station and am ge... [Article]
    ...Watermark sensor. When the sensor is new, or very dry, it must be soaked up before it will be able to respond. If the sensor is already wet, doubl

  10. Input Past End of File (RUN-TIME ERROR 62)Input Past End of File (RUN-TIME ERROR 62) [Article]
    This error message is generated when SpecWare is trying to append newly downloaded data to a data f...

  11. The Field Scout TDR meter display will not shut off or is displaying unusual information.The Field Scout TDR meter display will not shut off or is displaying unusual inf... [Article]
    The electronic header in the meter may have been disrupted by a static discharge. First, try removing a battery and waiting 60 seconds before putting it back in the battery compartment. 

  12. The "Contact Remote Weather Stations" option in the Logger MENU is not active.The "Contact Remote Weather Stations" option in the Logger MENU is not... [Article]
    Before this option is made available, SpecWare must launch or download a WatchDog full weather station (models 525, 550, 600, 700, 800, or 900ET). This option is not available with the WatchDog mini

  13. I have connected the Watermark sensor to my WatchDog logger (or weather station) and am getting dashes (or "Sensor Error" message) on the LCD screen.I have connected the Watermark sensor to my WatchDog logger (or weather station)... [Article]
    ...Watermark sensor. When the sensor is new, or very dry, it must be soaked up before it will be able to respond. If the sensor is already wet,

  14. Error Message: Bad Record Number message (TDR300)Error Message: Bad Record Number message (TDR300) [Article]
    ...dicate a bug in the Field Scout software. Please contact Spectrum Technologies (800-248-8873) to be...

  15. Error Message - ActiveX component can&#39t create objectError Message - ActiveX component can&#39t create object [Article]
    The message generally appears soon after installing SpecWare when trying to connect to a Model 100 (button) Logger. It is a result of Windows failing to register a key component during the reg

  16. I am seeing the wrong model number in the TDR Meter Settings screenI am seeing the wrong model number in the TDR Meter Settings screen [Article]
    The most common reason for this error is that the wrong COM port has been selected. Field Scout sof...s been selected. Field Scout software allows you to test the COM port. It is important to remember...

  17. Error message  on pH Pro (2100A)Error message on pH Pro (2100A) [Article]
    Indicates calibration error. This can be due to: -No standard solution on the sensor -Bubbles...

  18. What are the Horiba D-24 Dual pH/EC meters specifications? (2172)What are the Horiba D-24 Dual pH/EC meters specifications? (2172) [Article]
    Range: pH -2.00 - 16.00 (display range) pH -0.00 - 14.00 (measurement range)

  19. Error Message Error Message [Article]
    This message will appear when trying to open an existing data file. There is not enough data to graph over 3 time intervals. The logger has not been running long enough to collect data that spa

  20. Error Message Error Message [Article]
    This message appears in WDTest6 (when run from the WDTest6.exe file in the SpecWare directory) when attempting the Connection Test on a Com port that doesnt exist (or is not recognized by SpecWare).

(Page 2 of 4)     «« | Prev | 1 | 2 | 3 | 4 | Next | »»