Spectrum Technologies

Knowledgebase Home | Glossary | Favorites | Login Knowledgebase Home | Glossary | Favorites | Login
Search the Knowledgebase Browse by Category

Continue
Advanced Search
* Query:
  Categories:
  Rated:
Search Results for "Cardy Nitrate Meter"
There were 58 articles found for your query: (Page 3 of 3)     «« | Prev | 1 | 2 | 3 | Next | »»
  1. I am seeing the wrong model number in the TDR Meter Settings screenI am seeing the wrong model number in the TDR Meter Settings screen [Article]
    The most common reason for this error is that the wrong COM port has been selected. Field Scout software allows you to test the COM port. It is important to remember that this is a 2-part t

  2. How can I test the life left in my pH probe?How can I test the life left in my pH probe? [Article]
    A simple test can be performed using Windex glass cleaner with ammonia and any type of soft drink. The procedure is as follows: Turn your meter on and place the probe in a so

  3. Does the pH meter need to be calibrated before each use?Does the pH meter need to be calibrated before each use? [Article]
    No, most pH meters hold calibration very well. If you are using your meter every day then check it once a week. If you get a reading that is above or below what you were expe

  4. Error message  on pH Pro (2100A)Error message on pH Pro (2100A) [Article]
    Indicates calibration error. This can be due to: -No standard solution on the sensor -Bubbles on the surface of the ISFE

  5. What are the pH Pro Meter specifications? (2100A)What are the pH Pro Meter specifications? (2100A) [Article]
    Range: pH 2.0 to 12.0 Accuracy: +/- 0.1 pH Operati

  6. CAL symbol blinking on pH Pro LCD display (2100A)CAL symbol blinking on pH Pro LCD display (2100A) [Article]
    This symbol blinks while the meter is in calibration. If blinking does not end the sensor probably needs to be replaced.

  7. How do I calibrate this meter? (2205)How do I calibrate this meter? (2205) [Article]
    Please read the following attachment for a detailed calibration procedure or Check the man

  8. My pH Pro meter will not calibrate or loses calibration quickly.My pH Pro meter will not calibrate or loses calibration quickly. [Article]
    If your pH Pro meter will not accept/hold calibration according to the procedure in the manual, first check/replace the battery. If the problem persists, the sensor tip needs to be r

  9. What are the Fieldscout Soil EC probe/meter specifications? (2205)What are the Fieldscout Soil EC probe/meter specifications? (2205) [Article]
    Specs: Range: 0-199uS/cm, 0-19.0mS/cm Resolution: 1uS/cm, 0.01mS/cm

  10. What are the Milwaukee SM802 Economy pH/EC meter specifications? (2182)What are the Milwaukee SM802 Economy pH/EC meter specifications? (2182) [Article]
    Range: PH: 0.0 to 14.0 pH EC: 0.00 to 6.00 mS/cm

  11. How to calculate Daily Light Integral (DLI) with a Quantum Light MeterHow to calculate Daily Light Integral (DLI) with a Quantum Light Meter [Article]


  12. Cardy Twin pH Meters glass sensor cracked (2103)Cardy Twin pH Meters glass sensor cracked (2103) [Article]
    Warning! Thin glass sensor breaks very easily! Be careful not to press with fingernail while drying sensor. First rinse with water and softly blot dry the sensor with

  13. Why do my values vary under fluorescent lights when using the PAR Light Sensor (Item #3668I)?Why do my values vary under fluorescent lights when using the PAR Light Sensor (... [Article]
    When using the PAR Light Sensor (Item #3668I) and measuring under fluorescent lights values may vary because fluorescent lights flicker o

  14. Inaccurate TDR ReadingsInaccurate TDR Readings [Article]


  15. Meter reads "OR"  error messageMeter reads "OR" error message [Article]
    A possible reason for this message is

  16. When should the sensor in the pH Pro be replaced? (2100A)When should the sensor in the pH Pro be replaced? (2100A) [Article]
    The sensors service life is usually 150-200 hours of continuous immersion in water. The sensor needs replacement when: -The K

  17. TCM-500 Turf Color Meter Error: Light LeakageTCM-500 Turf Color Meter Error: Light Leakage [Article]
    The error message "LIGHT LEAKAGE" occurs when ambiant light leaks under the meter and on to the sample area. Be sure the meter is pressed firmly against a reasonably flat, uniform area and r

  18. Meter reads "OR"  error messageMeter reads "OR" error message [Article]
    A possible reason for this message is

(Page 3 of 3)     «« | Prev | 1 | 2 | 3 | Next | »»