Spectrum Technologies

Knowledgebase Home > Products > SpecWare Software | Glossary | Favorites | Login Knowledgebase Home | Glossary | Favorites | Login
Search the Knowledgebase Browse by Category
View Articles by Category
There are no sub categories
SpecWare Software rss button
There were 13 articles found in this category:
  1. questionReal-time weather monitor is not working / will not start
    The real-time weather monitor displays current conditions (updated every 15 seconds). It requires a direct wired connection or direct wireless connection from the weather station to PC. The weather station must be launched and functioning (confirm by checking display for data or by re-launchi ...

  2. question Which Com port do I use?
    Please try the paperclip test detailed on the user's manual: http://www.specmeters.com/assets/1/22/3656dis.pdf#page=6

  3. questionError Message "Division by zero"
    The "Division by Zero" error message can appear if there are too many files in the Specware directory (or the directory where data is being saved if different than the Specware directory) or there is a problem w/ voltage regulator. Currently, there is a maximum of 200 logger location folder ...

  4. questionError Message "Unable to Write WatchDog Header"
    The source of this message is similar to that for "Logger not found on port Com X". This message generally appears if an attempt is being made to reinitialize the logger's header but Specware is unable to contact the station. The most common reasons for this are that the wrong Com port has be ...

  5. questionError Message: The registration information for SpecWare has been tampered with (1). Please contact your distributor for assistance
    This message is usually triggered when the installation date of the software precedes the date on the computer. Check that the date and time on your computer are correct. If this does not correct the problem, contact Spectrum Technologies for assistance.

  6. questionError Message: Cannot Find File olch2x32.ocx, file not registered
    When SpecWare is installed, several files are created or modified in the Windows sub-directory. If the software did not install properly, one or more of these files may not be present. Also, if the computer hard drive has undergone a substantial clearing out, it is possible these files were del ...

  7. questionError Message 519 Unable to Contact WatchDog 2
    This message occurs when trying to use the 2000 Series Shuttle with version 1.06 and earlier of Spec8Pro. Update your Spec8Pro software.

  8. questionError Message
    This error message is generated when SpecWare is trying to append newly downloaded data to a data file that has characters after the last line of data. This can happen if the existing file has had data manually added or deleted, or if the file has otherwise been manipulated with a text editor. ...

  9. questionInput Past End of File (RUN-TIME ERROR 62)
    This error message is generated when SpecWare is trying to append newly downloaded data to a data file that has characters after the last line of data. This can happen if the existing file has had data manually added or deleted, or if the file has otherwise been manipulated with a text editor s ...

  10. questionError Message - ActiveX component can&#39t create object
    The message generally appears soon after installing SpecWare when trying to connect to a Model 100 (button) Logger. It is a result of Windows failing to register a key component during the registration. Quick solution: Click Windows "Start", then "Run...", and type the following line: regsvr3 ...

  11. questionError Message: WatchDog control file is not present in SpecWare application directory
    When running the executable program for SpecWare (Spec6.exe), the configuration file (Watchdog.cfg) must be present in the same directory. This message indicates that Specware cannot find the configuration file. If you are activating SpecWare from a Desktop icon, that icon may not be linked to ...

  12. questionError message: COM cannot be opened. Please use File/Preferences to ensure your communications port is set correctly
    This message appears when the Com port selected in the Preferences/Communications screen does not exist on the computer or if another device or application already using that COM port. SpecWare will still open but the correct Com port must be identified and selected in the Preferences/Communica ...

  13. questionError Message: An error occurred while connecting to the Logger/Station
    The message indicates that the memory on the logger has failed. The unit is not repairable.